Tesla Wall Connector Installation Brisbane
Tesla-accredited installers. We fit your Tesla Wall Connector from $990 incl. GST, fixed price, when you supply the charger, or we can supply it for you. Dedicated circuit, RCBO protection, maximum demand check and Certificate of Compliance included.
Reviewed by Lee Gundenswager (Lead Electrician, Connex Lic #92217) and Darren Standring (Owner). Last updated 2026-11-14.
Tesla home charger installation across Brisbane and Moreton Bay
Connex Electrical is a licensed Queensland electrical contractor (#92217) based in Mango Hill, and accredited to install Tesla Wall Connectors. We install Tesla Wall Connectors in garages, carports and driveways from Brisbane's northside to Moreton Bay.
Most Tesla owners buy the Wall Connector from the Tesla Shop and book us to install it. We can also supply the charger with the install. We check your switchboard and your home's maximum demand first, so the price you get is the price you pay.
Since 1 October 2026 Queensland allows a full-speed single-phase 32A charger without a network control device. Our Energex EV charger rules guide explains the change.
Charging a different EV? See EV charger installation Brisbane.
What is the Tesla Wall Connector?
It is Tesla's hardwired home charger. Tesla lists a 7.3 metre cable, indoor and outdoor use, and control through the Tesla app.
How fast does it charge?
Tesla quotes up to 50 km of range per hour on a single-phase 32A supply, and up to 75 km per hour on a three-phase 16A supply. Your car and your power supply set the real speed.
Does it charge other EVs?
Yes. Tesla says the Wall Connector can charge other electric vehicles, with speeds that vary by vehicle.
Tesla Wall Connector installation cost
A standard single-phase install is $990 incl. GST, fixed price. That covers up to 3m of cable, an RCBO, testing and your Certificate of Compliance.
The charger itself is separate. Tesla sells the Wall Connector through the Tesla Shop, where it has sold for around $800. Check Tesla's site for the current price.
Longer cable runs, three-phase supply or a full switchboard are the usual reasons a job costs more. Our guide on whether you need a switchboard upgrade explains how we assess it.
| Tesla Wall Connector job | Price (incl. GST) |
|---|---|
| Single-phase install, up to 3m of cable | From $990 |
| Additional cable | $25 per metre |
| Three-phase install | $1,500 to $2,200 |
| New RCBO for the charger circuit | $180 to $400 |
| Switchboard upgrade, if needed | $1,320 to $3,850 |
| Tesla Wall Connector unit | Bought from Tesla, or supplied by us |
Confirmed in writing before we start. See all prices.
A Tesla Wall Connector we installed
This is one of our own installs, not a stock photo.
The charger has its own dedicated circuit. The cable runs down the wall in conduit to an isolator switch beside the Wall Connector, so the charger can be switched off at the wall.
The charging cable coils neatly on the unit when it is not in use.
Single-phase or three-phase?
Most Brisbane homes have single-phase power, and that suits most Tesla drivers.
Single-phase home
Up to 50 km of range per hour on a 32A circuit, by Tesla's figures. An overnight charge covers a typical daily drive many times over.
Three-phase home
Up to 75 km of range per hour on a three-phase 16A circuit, by Tesla's figures. Worth it if you already have three-phase power.
Two Teslas
Tesla recommends two Wall Connectors set up to share power, so both cars charge without overloading your supply.
Solar homes
The Wall Connector does not divert surplus solar by itself. You can schedule charging for daylight hours in the Tesla app.
From enquiry to charging
Send two photos
Your switchboard and where the car parks. That is usually enough for a fixed price.
Price in writing
Fixed price before we start, including any extra cable or switchboard work.
Install
We run the dedicated circuit, mount the Wall Connector and test it. A standard job takes a few hours.
Set up and certify
We commission the charger with your car, show you the Tesla app settings and issue your Certificate of Compliance.
Tesla arriving soon?
Book the install before delivery day and charge at home from the first night.
Recent EV charger jobs across Brisbane & Moreton Bay
Tesla Wall Connector — Burpengary
Supplied and installed a Tesla Wall Connector at a Burpengary home. Wall-mounted in the garage on its own dedicated, RCBO-protected circuit, tested and handed over with a compliance certificate.
Evnex home charger — Windsor
Installed an Evnex charger at a Windsor property. Neat wall mount with isolator switch, dedicated RCBO-protected circuit, fully tested and certified.
Ocular charger — Redcliffe
Ocular EV charger installation at a Redcliffe home. Tidy cable run, dedicated RCBO-protected circuit, and a compliance certificate on completion.
EV charger — Narangba
EV charger install in Narangba. Dedicated RCBO-protected circuit, clean wall-mounted finish, tested and certified.
Tesla Wall Connector questions
How much does it cost to install a Tesla Wall Connector in Brisbane?
Our standard single-phase install is $990 incl. GST with up to 3m of cable. Extra cable is $25 per metre. Three-phase installs are $1,500 to $2,200. The charger is bought separately from Tesla.
Can any electrician install a Tesla Wall Connector?
It must be installed by a licensed electrical contractor. Connex Electrical holds Queensland licence #92217 and is accredited to install Tesla Wall Connectors.
Do I need to buy the Wall Connector first?
No. Our $990 price is for a Wall Connector you have bought from the Tesla Shop. We can also supply the charger and quote supply and install together.
How long does installation take?
A standard garage install takes a few hours. Our guide on how long EV charger installation takes covers longer jobs.
Do I need Energex approval?
Not for a standard install. Since 1 October 2026 a single-phase 32A charger no longer needs a network control device. We check your maximum demand and handle any Energex paperwork your job does need.
Can it be installed outside?
Yes. Tesla rates the Wall Connector for indoor and outdoor use.
Can you install one in an apartment or townhouse?
Often, yes, with body corporate approval. See EV charging in apartments and strata.
Will my switchboard cope?
We check before we quote. If the board is full or outdated, an upgrade is $1,320 to $3,850.
Where we install Tesla chargers
From our Mango Hill base we cover Brisbane's northside and Moreton Bay with one price list.
Connex Electrical is an independent electrical contractor and is not owned by or part of Tesla. Tesla and Wall Connector are trademarks of Tesla, Inc. Charger specifications are Tesla's published figures.
Get your Tesla Wall Connector installed
Call or request a fixed price. Send a photo of your switchboard and we can usually quote the same day.
Electrical Licence #92217 · ARC #AU42842 · $20M Public Liability · ABN 37 665 474 537