High, raked and cathedral ceilings are everywhere in Brisbane, from classic Queenslanders to modern open-plan builds. They look fantastic, but they make a ceiling fan installation trickier: you need the right downrod, a sloped-ceiling mount and safe access to work at height. Connex Electrical installs ceiling fans on high and raked ceilings across North Brisbane and Moreton Bay, safely and to standard.
Why high and raked ceilings need a specialist approach
On a standard 2.4m ceiling a fan mounts flush and moves plenty of air. On a high or angled ceiling, three things change:
- Drop: the fan needs a downrod to bring the blades to an effective height (around 2.1–2.7m above the floor)
- Angle: a raked or cathedral ceiling needs a sloped-ceiling bracket rated for the pitch
- Access: the install has to be done safely at height with the right equipment
Get any of these wrong and you end up with a fan that wobbles, sits too high to feel, or worse, is not safely secured overhead.
Downrods and getting the height right
A downrod is the metal rod that extends the fan below the mount. The higher or steeper the ceiling, the longer the rod needed. We size the rod to your ceiling height and fan model so you get proper airflow without the fan hanging too low. For very high rooms, a larger 1400–1500mm blade span combined with the right rod moves air far better than a small fan stranded near the ceiling.
High & raked ceiling fan installation prices (Brisbane)
Guide prices. Because access and rod length vary with ceiling height, we confirm the final price on site.
| Job | Typical Brisbane price |
|---|---|
| Fan on existing point, high/raked ceiling | From $220 (access dependent) |
| New wiring to a new fan point | From $260 |
| Downrod / extension rod supply & fit | $40–$120 (rod dependent) |
| Sloped / cathedral ceiling bracket | Quoted with fan |
| Additional access equipment (very high ceilings) | Quoted on site |
| Fan supply (unit only) | $200–$800 |
Prices are a guide for typical Brisbane jobs and confirmed on site. Tell us your approximate ceiling height when booking.
Safe installation at height
Working at height is where high-ceiling fan installs go wrong for DIYers. We bring the correct platform ladders or scaffold, brace the mount properly into the structure, and test the fan on every speed before we leave. A high fan done right is smooth, quiet and secure for years.
Related Ceiling Fan Guides
Ceiling fan installation services (Brisbane) · What size ceiling fan do I need? · Outdoor & alfresco fans · Replacing an old ceiling fan · Ceiling fan servicing & maintenance · Ceiling fan installation cost (2026)
Frequently asked questions
Installation on an existing fan point generally starts from $220, the same as a standard install. High, raked or cathedral ceilings can add to the cost where extra access equipment, a downrod or an extension rod is needed. New wiring to a fresh point starts from $260. We confirm the full price on site once we have seen the ceiling height and access.
Usually, yes. On a high or raked ceiling a downrod drops the fan to the ideal height, around 2.1 to 2.7 metres above the floor, so it moves air effectively. The steeper the rake, the more important a proper rod and a compatible sloped-ceiling mount become. We size the rod to your ceiling height and fan model.
Yes. Raked, sloped and cathedral ceilings are common in Brisbane homes and Queenslanders, and most quality fans support them with a sloped-ceiling bracket and the right downrod. We confirm the fan you have chosen is rated for the angle of your ceiling before we install.
We bring the correct access equipment, platform ladders or a scaffold tower depending on the height, so the fan is installed safely and securely. Please give us an approximate ceiling height when you book so we arrive with the right gear and there are no delays on the day.
High-ceiling rooms are often large open spaces, so a larger blade span, typically 1400mm to 1500mm, moves air best. On a very high ceiling a downrod is what actually gets the air down to you. See our fan sizing guide for a room-by-room chart, and we are happy to advise on the day.
Working at height carries real risk, which is exactly why it should be done by a licensed electrician with the right access equipment and fall protection, not on a wobbly household ladder. A correctly rod-mounted and braced fan on a high ceiling is completely safe once installed by a professional.
Reviewed by Lee Gundenswager (Lead Electrician, Connex Lic #92217) and Darren Standring (Owner). Connex Electrical, QLD Electrical Contractor #92217.