Air Conditioning Installation Margate
Margate is rebuilding itself, with new apartments rising near the beach and older homes being renovated or replaced. We install air conditioning that fits the building, whether it is brand new or 50 years old.
Air conditioning installation cost in Margate: installation only (your own unit) from $1,120 incl. GST, or a TCL 2.5 kW split supplied & installed from $1,650 incl. GST — no callout fee, with free on-site quotes for ducted and multi-head jobs.
Reviewed by Lee Gundenswager (Lead Electrician, Connex Lic #92217) and Darren Standring (Owner). Last updated 2026-11-06.
Air con for a suburb in the middle of a rebuild
Margate has been a seaside address since the 1880s, and right now it is changing faster than at any time in decades.
The first land sales here came early: Beaconsfield Estate around 1880, Dover Estate in 1883 and McCulloch's Beach Estate in 1889, with the Parry-Okeden Estate following in 1933. Humpybong Provisional School opened in 1876, making it one of the oldest schools on the peninsula. Those early estates explain why so many Margate lots are compact and close to the water.
The new chapter is height. A six-storey limit applies along Duffield Road toward the beach, and between 2019 and 2021 many older buildings around Oxley Avenue were knocked down for modern houses and units. The well-known Waltzing Matilda motel was replaced by a four-storey luxury apartment block. For air conditioning that means two very different jobs on the same street: strata installs in new buildings, and retrofits in older homes that are still standing.
Margate is also one of the densest suburbs on the peninsula, at roughly 2,900 people per square kilometre. Close neighbours make placement important, so we position condensers to keep noise and warm exhaust air away from bedroom windows next door.
We travel across the peninsula from our Mango Hill base to Margate, 2.6 km south of Redcliffe on the bay side. Also see EV charger installation in Margate and Electrician Margate.
Installing in a new apartment building
Newer blocks often have a set location for outdoor units, pre-run pipe sleeves or a specified brand. Ask your body corporate or building manager for the by-laws and any approved install details, and we will work to them.
If no provision was made, we design a balcony or wall install and supply the details you need for approval. Our split system explainer is handy for committee members too.
Renovating an older beach house
If you are renovating, the best time to plan air con is before the plasterboard goes up. We can rough in pipework and a dedicated circuit early, then fit the units once painting is finished.
Facing the bay
Margate faces Moreton Bay with views to Moreton Island, so the beachfront streets cop salt spray. We recommend a coil-protected outdoor unit and corrosion-resistant fixings for those blocks.
Margate air conditioning services
Matched to new builds, apartments and established homes.
Strata and apartment installs
Balcony and façade installs designed around body corporate rules. Quoted after a free assessment.
Renovation rough-ins
Pipework, drains and circuits run during a renovation, units fitted at the end.
Neighbour-friendly placement
Condensers placed and mounted to keep noise and airflow away from close-by windows.
Maintenance by the beach
Regular cleaning and checks to keep salt and sand from cutting a unit's life short.
Also available in Margate
- Back-to-back splits for single-storey homes
- Multi-head systems for apartments with limited outdoor space
- Replacing original units in older units and townhouses
- Dedicated circuits with RCBO protection
- Switchboard upgrades for older houses
- Anti-vibration mounts for quieter operation
- Certificate of compliance on every install
Air conditioning installation prices in Margate
Houses usually fit our standard pricing; apartments are confirmed after we see the building.
A standard back-to-back split, installation only, starts from $1,120 incl. GST, and a TCL 2.5 kW split supplied and installed starts from $1,650 incl. GST. Apartment, multi-head, renovation rough-in and longer pipe-run jobs are quoted after a free assessment, and additional costs may apply for non-standard installs.
Older homes may need a switchboard upgrade at $1,320 to $3,850 incl. GST. See our installation cost guide for what drives the price.
| Common Margate AC jobs | Price (incl. GST) |
|---|---|
| Split system, installation only (back-to-back) | From $1,120 |
| TCL 2.5 kW split, supply and install (standard) | From $1,650 |
| Apartment or balcony install | Quoted after free assessment |
| Renovation rough-in and fit-off | Quoted after free assessment |
| New circuit RCBO / safety switch | $180 to $400 |
| Switchboard upgrade | $1,320 to $3,850 |
Confirmed in writing before work starts. See all prices.
From approval to cool air
Check the rules
For units we start with the by-laws; for houses we start with the board and wall construction.
Design the install
We pick indoor and outdoor positions, the pipe route and drain point, and note anything the body corporate needs.
Book and fit
Once approved, we install with care for common areas, lifts and neighbours.
Commission and document
System tested, certificate issued, and paperwork ready for your strata records.
Building, renovating or buying in Margate?
Talk to us early and we will plan air con that suits the building. Call for a free quote.
Why Margate owners call Connex
Strata experience
We know what committees ask for and supply clear install details.
New and old buildings
Equally at home in a recent apartment or an older beach house.
Considerate installers
We protect lifts, hallways and floors, and we clean up as we go.
Fully licensed
Electrical Licence #92217 and ARCtick refrigeration licence #AU42842.
Honest pricing
All prices include GST, and no callout fee on booked work.
Local reputation
5.0 stars on Google and more than 5,000 customers since 2014.
Margate air conditioning FAQs
Do I need body corporate approval for air con in a Margate unit?
In most buildings, yes, especially for the outdoor unit and any external pipework. Check your by-laws first. We supply install details to help with the approval.
My new apartment has no air con provision. Can it still be done?
Usually. We look at balcony space, wall construction and drainage, then design an install that meets the building rules. These jobs are quoted after an assessment.
When should air con be planned in a renovation?
Before walls are lined. Running pipework and the circuit early is cleaner and cheaper than chasing walls later. We coordinate with your builder.
Will the outdoor unit annoy my neighbours?
Modern inverter units are quiet, and placement matters most. We avoid pointing exhaust air at nearby windows and use anti-vibration mounts where needed.
Which brand suits a beachfront Margate home?
Look for a model with a protected condenser coil. Our guide to the best air conditioners for Queensland covers the options, and we can advise on site.
Can one outdoor unit cool several rooms in my apartment?
Yes, a multi-head system runs two or more indoor units from one outdoor unit, which helps when balcony space is tight. Multi-head systems are quoted after a free assessment.
Neighbouring suburbs we service
We cover the whole eastern side of the peninsula and back to Mango Hill.
Book a Margate air conditioning install
Call 0474 207 609 for a free quote, whether you own a new apartment or an older beach home. Every price includes GST.
Electrical Licence #92217 · ARC #AU42842 · $20M Public Liability · ABN 37 665 474 537
